iPad

Post Date:

Starting in iOS 10, a new way exists through the actions rotor to move apps around your various home screens. While the old method is still available, the new way of accomplishing this task seems to be preferred by many. In iOS 11, it then became possible to drag multiple apps at the same time. The below process was written for iOS version 12.1, and if the instructions do not work as outlined below, chances are good you are not running that version of iOS.

Post Date:

Intro

Sometimes, the dock is just so small, but you have so many apps that are essential, and you'd rather not go sifting through your pages looking for that app when you need it. With this cool trick, you can fit more than 4 apps in your dock, just by using folders. Here's how.

Quick Notes

I previously wrote this guide to demonstrate this process, but since then it has been very out of date. Therefore, I've updated the guide accordingly and I've split it into two separate sections.

Post Date:

First, check to see if the version you want to downgrade to is still being signed. Google should do the trick or else idownloadblog.com always posts when an ios version has stopped being signed. Second, go to ipsw.me and download the version you want to downgrade to and download it. Idownloadblog.com also has a downloads page where you can find ios versions. Third, go to your downloads folder and open the file you just downloaded. It should open in itunes. If not, use open in.

Post Date:
How to Get Push Gmail Notifications on your iOS device 1. go to www.outlook.com and create an account. Create an outlook.com email address, do not use your gmail address. 2. sign into your gmail account and go to settings 3. go to forwarding and add your outlook.com email address. Choose to archive gmail's copy of the message. 4. sign into your outlook.com account 5. go to options, then more mail options 6. add your gmail account as a send account 7. select your gmail account as the default address for new messages and replies 8.
Post Date:
If you want a quick way to time something and you do not care about it being perfectly accurate but you do not want to have to go in to the clock app and set a timer, alarm or stopwatch, just single finger single tap on or swipe to the part of the statice bar that says the time. VoiceOver will say the time every minute. Note that because the iOS clock does not do seconds, when you first start timing, you will not know what second of the minute you are starting timing at, but after that you will get full minutes.
Post Date:

This guide assumes that you have previously created a fanfiction.net account and have waited the amount of time before you are allowed to create a new story. i recommend you use a hardware keyboard of some sort, otherwise this will be quite difficult, maybe even impossible.

Post Date:

This guide assumes that you have already received an invitation to AO3, and created your account. These steps will most likely be most easily followed using an ipad and bluetooth keyboard, but should also be doable on any mobile device with voiceover.

Post Date:

Before writing this guide, I had searched the Applevis site about this topic. According to the threads I have read, some people are having difficulties making this feature work.

This guide will not make your raise to record feature work consistently because to tell you guys honestly, that feature is a hit and miss, more often the latter. So without further ado, here are the steps.

Note: This tip only works on the Messages app, so if you are trying to do this on the quick reply view, this is not going to work.

Post Date:

I’ve been waiting for the option to slow down the speed of double-tapping when using VoiceOver for quite some time and now with iOS 9.1 it is here!

Post Date:

Intro

When iPhone X was released, it introduced a few swipe gestures to replace the Home Button. In iOS 12, Apple brought similar gestures to iPad, even the models that still have a home button. It seems like this new way of doing things is here to stay, so I wanted to try to demystify it. The below applies to all iOS and iPadOS devices I know of, running version 12 or newer.

Post Date:

What is an iDevice?

Throughout this document, the term 'iDevice' is used to refer to a portable Apple device with a touch screen. This includes the iPod Touch, iPhone, and iPad product lines. When a specific device is mentioned, it is intentional. For instance, all iDevices have wifi, but only the iPhone and cellular-enabled iPad can access cellular networks. This is not an official term, but rather one adopted by the author for the sake of clarity.

Post Date:

What Is This Rotor Thing?

The VoiceOver rotor is perhaps the most difficult aspect of VoiceOver to get used to because it is not a concept used in other screen readers. It is basically a way to use the same two gestures--an up and down swipe with one finger--to perform multiple tasks. That is, an up or down swipe will do the action set in the rotor, and the rotor can be set at any point.

Post Date:

To complete this process, you must have agreed to the BARD Service agreement, and be signed in to a BARD account. This will not work for people who do not have accounts with the national Library Service for the Blind and Physically handicapped . For more info on whether you qualify, and to apply if you do, see the BARD Main Page

Post Date:
Creating Shortcuts A Narrative Guide for the Befuddled Beginner iOS 12 introduced shortcuts: a way for you to combine a set of steps to accomplish a task. People who program would call this a script. In fact an app or software program is nothing more than a very sophisticated set of steps designed to accomplish a task. If you ever wanted to learn programming, you can start right now to create shortcuts.
Post Date:

Introduction

VoiceOver, a feature Apple has built into all iOS devices to enable Braille and speech access for users who are unable to see the screen, has revolutionized the lives of countless thousands of blind people around the world. It works best when apps are deliberately developed in ways that ensure compatibility with VoiceOver, blind people are considered during development and included in all facets of the testing process.

Post Date:

Can My iOS Device Be a GPS?

Probably. If you have an iPhone or a cellular-capable iPad, then you can start using GPS apps right away. Owners of wifi-only iPads or all iPod Touch models do not have this luxury.

Post Date:

Updated: iOS 9

Listed below are some common commands which can be used with Siri in iOS 9.

Post Date:

In this guide, I'm going to explain how you can visualise the layout of iOS apps using voiceOver, or VO for short. even though you may be totally blind. This can be done quite easily, even without using a ScreenDots protector, or relying on a bluetooth keyboard for navigation purposes.

I understand that everyone is different, so if you do find these accessories essential, then by all means continue to use them. However, if you master the below techniques, I believe you'll be able to use your iDevice as efficiently as your sighted peers.

Post Date:

Introduction

This guide will focus on completing the task of transferring a file via Wi-Fi from your Mac or PC to your iOS device, from one iOS device to another, and vice versa. The actions which can be carried out with the transferred file will also be discussed.

Post Date:

I had a problem moving pics off my iPHONE to my PC, which I solved. Am posting here so it might help others.

For purposes of keyword searching, see also
photos, pictures, copy, delete, transfer, import

We were on vacation and my hubby wanted to use my iPHONE as a camera.